Sabre 1400 / M92 / F90 - hydrofoil set

The Sabre is a comprehensive package for individuals venturing into freeride wingfoiling and wave-riding, offering exceptional value and performance. The Sabre delivers impressive speed and is versatile enough to handle lower speeds effectively. The extended fuselage enhances pitch stability and efficiency at lower speeds, ensuring smooth rides. With a height of 92cm, the mast minimises touch-downs and provides clearance over choppy waters and moderate ocean swells, enhancing the overall riding experience. The mid-aspect front foil with a surface area 1400cm2 is well-suited for riders weighing 60-80kg and ideal for wind conditions from 15-25 knots. The rear stabiliser foil, with a surface area 320cm2, ensures exceptional stability in pitch and yaw movements crucial for progressing from learning to intermediate riding. While the total fuselage length measures 90cm, the critical distance between the trailing edge (TE) of the front foil and the leading edge (LE) of the rear stabiliser is 61cm, 49.7cm from the front foil's leading edge (LE) to the mast centre and 12cm from the front foil's trailing edge (TE) to the mast centre.

The milled aluminium fuselage provides the backbone of the hydrofoil assembly, offering a stiff connection between the front foil, rear stabiliser, and mast. This enhances rider feedback and control, crucial for a smooth, responsive riding experience. The wide front foil connections increase torque stiffness over single strut attachments, secured by 3 x 8m stainless Torx Screws for a secure and reliable connection. The 92cm extruded aluminium mast offers exceptional rigidity and strength, can withstand frequent falls and groundings often encountered during the learning process, and is superior to carbon. The Sabre kit includes four different-sized shims that fit between the stabiliser and the fuselage to fine-tune your ride. Using a + shim provides a higher angle of attack (AOA), resulting in a more 'nose-up' ride, and each shim is numbered according to the angle of attack (AOA). The front foil and rear stabiliser are fabricated from 12k carbon twill using high-pressure compression moulding, ensuring exceptional strength and performance. The mounting plate, milled from aluminium, features a dual rail plate fitting for secure attachment to the board, providing stability and ease of installation. All components supplied within a padded quality zippered bag.

HARDWARE: Torx Key, Grease,Torx Screws M6 x 20mm x 3 (Rear foil to fuselage) Torx Screws M8 x 20mm x 3 (Front foil to fuselage) Torx Screws M6 x 35mm x 6 (Mast head and fuselage to mast).