Sabre Hydrofoil - 1400-92-F71

The Sabre is a comprehensive package for individuals venturing into freeride wingfoiling, tricks and wave-riding, offering exceptional value and performance. The Sabre delivers impressive speed and is versatile across a wide range of wind strengths.

The mid-aspect front foil with a surface area of 1400cm2 is well-suited for riders weighing 60-80kg and ideal for wind conditions from 15-25 knots. The rear stabiliser foil, with a surface area of 320cm2, ensures exceptional stability in pitch and yaw movements crucial for progressing from learning to intermediate riding. With a mast height of 92cm, touch-downs are minimised, and clearance over choppy waters and moderate ocean swells is improved, enhancing the overall riding experience.

The reduced-length fuselage promotes high levels of manoeuvrability, tight turns, and responsiveness. Although its total length measures 71cm, the critical distance between the trailing edge (TE) of the front foil and the leading edge (LE) of the rear stabiliser is just 43cm, 34cm from the front foil's leading edge (LE) to the mast centre, and 9cm from the front foil's trailing edge (TE) to the mast centre.

The milled aluminium fuselage provides the backbone of the hydrofoil assembly, offering a stiff connection between the front foil, rear stabiliser, and mast. This enhances rider feedback and control, which is crucial for a smooth, responsive riding experience.

The wide front foil connections increase torque stiffness over single strut attachments, secured by 3 x 8m stainless Torx Screws for a secure and reliable connection.

The 92cm extruded aluminium mast offers exceptional rigidity and strength, can withstand frequent falls and groundings often encountered during the learning process, and is superior to carbon.

The Sabre kit includes four-sized shims that fit between the stabiliser and the fuselage to fine-tune your ride. Using a + shim provides a higher angle of attack (AOA), resulting in a more 'nose-up' ride, and each shim is numbered according to the angle of attack (AOA).

The front foil and rear stabiliser are fabricated from 12k carbon twill using high-pressure compression moulding, ensuring exceptional strength and performance. The mounting plate, milled from aluminium, features a dual rail plate fitting for secure attachment to the board, providing stability and ease of installation. All components are supplied within a padded quality zippered bag.

HARDWARE: Torx Key, Grease, Torx Screws M6 x 20mm x 3 (Rear foil to fuselage) Torx Screws M8 x 20mm x 3 (Front foil to fuselage) Torx Screws M6 x 35mm x 6 (Mast head and fuselage to mast).